The wishlist name can't be left blank
×

:

Not a valid Time
This is a required field.
DCD 1/4

DCD 1/4" Wire Single Leg Pulling Harness 1/EA

DCD 1/4

DCD 1/4" Wire Long Double Leg Pulling Harness 1/EA

DCD 1/4" Wire Short Double Leg Pulling Harness 1/EA

$204.31
Availability: Pending Availability



SKU
DCD 25000-020
Sold Per 1 Each DCD 1/4" Wire Short Double Leg Pulling Harness Product Information:

The purpose of this product is to allow single or multiple pulls at one time by attaching 1 or 2 cables to the one pulling harness. The harness legs are manufactured from aircraft quality galvanized wire rope while the connector end is manufactured from stainless steel

The two leg units are staggered in length so the individual connections are not interfering with each other. The safety factor is based on equal pull on both legs

The double leg harness is available in long or short configurations and each is supplied with 1 hex key and 4 set screws. The single harness is supplied with 1 hex key and 2 set screws. Both the hex key and the set screws are available separately

Cable sizes that can be pulled with these harnesses are 2/0 to 4/0 AWG Part No.: 25000-020 Wire Dia.: 1/4" No. Of Legs: 2 Leg Capacity: 2,300 lbs. Total Capacity: 4,600 lbs. Weight: 1.70 lbs.

More Information
Alt ProductID 25000-020
Weight 1.700000
New Yes
Description Sold Per 1 Each DCD 1/4" Wire Short Double Leg Pulling Harness Product Information:

The purpose of this product is to allow single or multiple pulls at one time by attaching 1 or 2 cables to the one pulling harness. The harness legs are manufactured from aircraft quality galvanized wire rope while the connector end is manufactured from stainless steel

The two leg units are staggered in length so the individual connections are not interfering with each other. The safety factor is based on equal pull on both legs

The double leg harness is available in long or short configurations and each is supplied with 1 hex key and 4 set screws. The single harness is supplied with 1 hex key and 2 set screws. Both the hex key and the set screws are available separately

Cable sizes that can be pulled with these harnesses are 2/0 to 4/0 AWG Part No.: 25000-020 Wire Dia.: 1/4" No. Of Legs: 2 Leg Capacity: 2,300 lbs. Total Capacity: 4,600 lbs. Weight: 1.70 lbs.

Working Load Limit 2,300 lb