The purpose of this product is to allow single or multiple pulls at one time by attaching 1 or 2 cables to the one pulling harness. The harness legs are manufactured from aircraft quality galvanized wire rope while the connector end is manufactured from stainless steel
The two leg units are staggered in length so the individual connections are not interfering with each other. The safety factor is based on equal pull on both legs
The double leg harness is available in long or short configurations and each is supplied with 1 hex key and 4 set screws. The single harness is supplied with 1 hex key and 2 set screws. Both the hex key and the set screws are available separately
Cable sizes that can be pulled with these harnesses are 2/0 to 4/0 AWG Part No.: 25000-021 Wire Dia.: 1/4" No. Of Legs: 2 Leg Capacity: 2,300 lbs. Total Capacity: 4,600 lbs. Weight: 2.00 lbs.
Alt ProductID | 25000-021 |
---|---|
Weight | 2.000000 |
New | Yes |
Description | Sold Per 1 Each
DCD 1/4" Wire Long Double Leg Pulling Harness
Product Information:
The purpose of this product is to allow single or multiple pulls at one time by attaching 1 or 2 cables to the one pulling harness. The harness legs are manufactured from aircraft quality galvanized wire rope while the connector end is manufactured from stainless steel The two leg units are staggered in length so the individual connections are not interfering with each other. The safety factor is based on equal pull on both legs The double leg harness is available in long or short configurations and each is supplied with 1 hex key and 4 set screws. The single harness is supplied with 1 hex key and 2 set screws. Both the hex key and the set screws are available separately Cable sizes that can be pulled with these harnesses are 2/0 to 4/0 AWG Part No.: 25000-021 Wire Dia.: 1/4" No. Of Legs: 2 Leg Capacity: 2,300 lbs. Total Capacity: 4,600 lbs. Weight: 2.00 lbs. |
Working Load Limit | 2,300 lb |