The wishlist name can't be left blank
×

:

Not a valid Time
This is a required field.
DCD 2/0-4/0 AWG Mini Grip 1/EA

DCD 2/0-4/0 AWG Mini Grip 1/EA

DCD 1/4

DCD 1/4" Wire Short Double Leg Pulling Harness 1/EA

DCD 1/4" Wire Single Leg Pulling Harness 1/EA

$127.70
Availability: Pending Availability



SKU
DCD 25000-010
Sold Per 1 Each DCD 1/4" Wire Single Leg Pulling Harness Product Information:

The purpose of this product is to allow single or multiple pulls at one time by attaching 1 or 2 cables to the one pulling harness. The harness legs are manufactured from aircraft quality galvanized wire rope while the connector end is manufactured from stainless steel

The two leg units are staggered in length so the individual connections are not interfering with each other. The safety factor is based on equal pull on both legs

The double leg harness is available in long or short configurations and each is supplied with 1 hex key and 4 set screws. The single harness is supplied with 1 hex key and 2 set screws. Both the hex key and the set screws are available separately

Cable sizes that can be pulled with these harnesses are 2/0 to 4/0 AWG Part No.: 25000-010 Wire Dia.: 1/4" No. Of Legs: 1 Leg Capacity: 2,300 lbs. Total Capacity: 2,300 lbs. Weight: 1.00 lbs.

More Information
Alt ProductID 25000-010
Weight 1.000000
New Yes
Description Sold Per 1 Each DCD 1/4" Wire Single Leg Pulling Harness Product Information:

The purpose of this product is to allow single or multiple pulls at one time by attaching 1 or 2 cables to the one pulling harness. The harness legs are manufactured from aircraft quality galvanized wire rope while the connector end is manufactured from stainless steel

The two leg units are staggered in length so the individual connections are not interfering with each other. The safety factor is based on equal pull on both legs

The double leg harness is available in long or short configurations and each is supplied with 1 hex key and 4 set screws. The single harness is supplied with 1 hex key and 2 set screws. Both the hex key and the set screws are available separately

Cable sizes that can be pulled with these harnesses are 2/0 to 4/0 AWG Part No.: 25000-010 Wire Dia.: 1/4" No. Of Legs: 1 Leg Capacity: 2,300 lbs. Total Capacity: 2,300 lbs. Weight: 1.00 lbs.

Working Load Limit 2,300 lb