The Stanley SK58 underwater sinker drill is a heavy duty rock drill designed for underwater drilling in conrete, rock and masonry. The SK58 uses industry standard drill steel and can drill up to 20' (6m" deep. The direct drive rotation motor drives the 1" x 4 1/4" hex shank drill steel and is adjustable between 0 and 300 rpm.
T-Handle with feathering on/off valve allows easy start and control
Stainless Steel spools and fasteners
Drills up to 3" diameter hole up to 20' deep
Operates in any position
Requires air to clear holes of debris
Specifications
Part #
Weight
Length
Width
Flow Range
SK58310
70 lbs / 32 kg
26 in. / 66 cm
18 in. / 46 cm
1500-2000 psi / 105-140 bar
Accessories
Part #
Description
04914
Carbide Rock Bits for Use w/Air, 2 In. Dia. H-Thread, Also Requires Drill Steel
05177
Carbide Rock Bits for Use w/Air, 1-3/8 In. Dia. H-Thread, Also Requires Drill Steel
05178
Carbide Rock Bits for Use w/Air, 1-1/2 In. Dia. H-Thread, Also Requires Drill Steel
04915
Drill Steels for Use w/Water, 1 X 4-1/4 In. H-Thread, 36 In. U/C
05170
Drill Steels for Use w/Air, 1 X 4-1/4 In. H-Thread, 24 In. U/C
05171
Drill Steels for Use w/Air, 1 X 4-1/4 In. H-Thread, 48 In. U/C
05174
Drill Steels for Use w/Air, 7/8 X 4-1/4 In. H-Thread, 24 In. U/C
The Stanley SK58 underwater sinker drill is a heavy duty rock drill designed for underwater drilling in conrete, rock and masonry. The SK58 uses industry standard drill steel and can drill up to 20' (6m" deep. The direct drive rotation motor drives the 1" x 4 1/4" hex shank drill steel and is adjustable between 0 and 300 rpm.
T-Handle with feathering on/off valve allows easy start and control
Stainless Steel spools and fasteners
Drills up to 3" diameter hole up to 20' deep
Operates in any position
Requires air to clear holes of debris
Specifications
Part #
Weight
Length
Width
Flow Range
SK58310
70 lbs / 32 kg
26 in. / 66 cm
18 in. / 46 cm
1500-2000 psi / 105-140 bar
Accessories
Part #
Description
04914
Carbide Rock Bits for Use w/Air, 2 In. Dia. H-Thread, Also Requires Drill Steel
05177
Carbide Rock Bits for Use w/Air, 1-3/8 In. Dia. H-Thread, Also Requires Drill Steel
05178
Carbide Rock Bits for Use w/Air, 1-1/2 In. Dia. H-Thread, Also Requires Drill Steel
04915
Drill Steels for Use w/Water, 1 X 4-1/4 In. H-Thread, 36 In. U/C
05170
Drill Steels for Use w/Air, 1 X 4-1/4 In. H-Thread, 24 In. U/C
05171
Drill Steels for Use w/Air, 1 X 4-1/4 In. H-Thread, 48 In. U/C
05174
Drill Steels for Use w/Air, 7/8 X 4-1/4 In. H-Thread, 24 In. U/C