DEWALT Triggerfoam Pro All Seas. 29Oz

TriggerFoam Pro is a one part polyurethane expanding foam with an extended temperture range which sets into its final form by using moisture present in the air. When installing the foam, consideration should be given to the 2-3 times expansion of the foam after it leaves the nozzle. Thesurface of the foam initially dries within 1-4 hours and becomes fully cured in 12-15 hours. Extended application temperature range allows use at temperatures as low as 23F (-5C). May be used at 14F (-10C) if can is stored at 77F (25C) for 8 hours before use. TriggerFoam Pro sets well on ordinary surfaces such as concrete, brick, metal, etc. Surfaces do not require preparation and can also be damp. After installation, it is recommended that a full 24 hours elapse prior to scraping, sanding, staining or painting. The foam has a R-5 equivalent value when used in place of traditional installation methods.

Features

• CFC free propellant
• Low odor
• Does not rot or deteriorate with age
• Physiologically harmless when fully cured
• Class B2 Flame retardant
• Contains no urea formaldehyde or PCB's

Specifications

• Battery Included: No
• Height: 2.500 in
• Length: 13.000 in
• Country of Origin: SI
• Power Source: NON-ENERGY USING
• Weight: 2.080 lbs
• Hazmat Code: P4
• Width: 2.500 in
• Individual Vs. Set (Syndigo): INDIVIDUAL
• Net Lit-Ion Y/N: No