BE THE FIRST TO KNOW
Subscribe to the Build It Right newsletter to receive timely updates from your favorite products.
The DCD Power Blower is unique, a portable unit with the maximumv pressure available in this class of line blowers: up to 30% higher. While there are several other similar products on the market, the DCD unit offers an excellent list of special features including:
Acceptable for outdoor use (not in rain).
Heavy duty industrial three-stage motor with sealed bearings and delivering up to 95 cfm and 5 psi
A heavy-duty 2 hose made of crush resistant polyethylene, 25 long, which will stand up in temperatures from -40 to +140 deg F
The blowers operate at 120V and require 15 amp source. A 220V/110V voltage convertor and a plug adapter are also available
Although other manufacturers have a higher cfm rating, that will only increase the speed of the dart. The higher pressure rating is key because this will allow a dart carrying pull tape or twine to travel further with higher loads, even though it might take a few seconds longer (see below for a full explanation)
DCD also offers a full line of blowing accessories detailed on the following pages, available as kits or individually to build your own toolbox. DCD Line Blowing products feature a range of innovations to suit your application and go farther
Includes 30 AMP twist plug Part No.: 58400-110 Weight: 46.00 lbs.
| Alt ProductID | 58400-110 |
|---|---|
| Weight | 35.500000 |
| New | Yes |
| Description | Sold Per 1 Each
DCD Power Blower With Seal-Offs for 1/2" to 6" Duct And Hose 2" Diameter x 25ft long 110V
Product Information:
The DCD Power Blower is unique, a portable unit with the maximumv pressure available in this class of line blowers: up to 30% higher. While there are several other similar products on the market, the DCD unit offers an excellent list of special features including: Acceptable for outdoor use (not in rain). Heavy duty industrial three-stage motor with sealed bearings and delivering up to 95 cfm and 5 psi A heavy-duty 2 hose made of crush resistant polyethylene, 25 long, which will stand up in temperatures from -40 to +140 deg F The blowers operate at 120V and require 15 amp source. A 220V/110V voltage convertor and a plug adapter are also available Although other manufacturers have a higher cfm rating, that will only increase the speed of the dart. The higher pressure rating is key because this will allow a dart carrying pull tape or twine to travel further with higher loads, even though it might take a few seconds longer (see below for a full explanation) DCD also offers a full line of blowing accessories detailed on the following pages, available as kits or individually to build your own toolbox. DCD Line Blowing products feature a range of innovations to suit your application and go farther Includes 30 AMP twist plug Part No.: 58400-110 Weight: 46.00 lbs. |
