The wishlist name can't be left blank
×

:

Not a valid Time
This is a required field.
DCD Power Blower w/Seal-Offs 1/EA

DCD Power Blower w/Seal-Offs 1/EA

DCD 110V Power Blower 1/EA

$1,613.71
Availability: Pending Availability



SKU
DCD 58400-000
Sold Per 1 Each DCD 110V Power Blower Product Information:

The DCD Power Blower is unique, a portable unit with the maximumv pressure available in this class of line blowers: up to 30% higher. While there are several other similar products on the market, the DCD unit offers an excellent list of special features including:

Acceptable for outdoor use (not in rain).

Heavy duty industrial three-stage motor with sealed bearings and delivering up to 95 cfm and 5 psi

A heavy-duty 2 hose made of crush resistant polyethylene, 25 long, which will stand up in temperatures from -40 to +140 deg F

The blowers operate at 120V and require 15 amp source. A 220V/110V voltage convertor and a plug adapter are also available

Although other manufacturers have a higher cfm rating, that will only increase the speed of the dart. The higher pressure rating is key because this will allow a dart carrying pull tape or twine to travel further with higher loads, even though it might take a few seconds longer (see below for a full explanation)

DCD also offers a full line of blowing accessories detailed on the following pages, available as kits or individually to build your own toolbox. DCD Line Blowing products feature a range of innovations to suit your application and go farther Part No.: 58400-000 Weight: 34.00 lbs.

More Information
Alt ProductID 58400-000
Weight 20.000000
New Yes
Description Sold Per 1 Each DCD 110V Power Blower Product Information:

The DCD Power Blower is unique, a portable unit with the maximumv pressure available in this class of line blowers: up to 30% higher. While there are several other similar products on the market, the DCD unit offers an excellent list of special features including:

Acceptable for outdoor use (not in rain).

Heavy duty industrial three-stage motor with sealed bearings and delivering up to 95 cfm and 5 psi

A heavy-duty 2 hose made of crush resistant polyethylene, 25 long, which will stand up in temperatures from -40 to +140 deg F

The blowers operate at 120V and require 15 amp source. A 220V/110V voltage convertor and a plug adapter are also available

Although other manufacturers have a higher cfm rating, that will only increase the speed of the dart. The higher pressure rating is key because this will allow a dart carrying pull tape or twine to travel further with higher loads, even though it might take a few seconds longer (see below for a full explanation)

DCD also offers a full line of blowing accessories detailed on the following pages, available as kits or individually to build your own toolbox. DCD Line Blowing products feature a range of innovations to suit your application and go farther Part No.: 58400-000 Weight: 34.00 lbs.