DEWALT Onboard Rotary Hammer Dust Extractor For 1-Inch SDS Plus Hammers

This OSHA Table 1-compliant Dust Extractor works with the DCH273 1-inch Hammer. It features an OSHA 1926.1153-compliant Dust Box Assembly. With a filter cleaning mechanism and a HEPA filter, it removes 99.97% of airborne particles 0.3 microns or greater. The Dust Extractor has a powerful built in motor for increased suction during high performance drilling. The 2-second power-off delay ensures that dust extraction continues after the drill is switched off. It accomodates drill bit diameters up to 5/8-inch which allows users to drill overhead for 1/2-inch drop-ins.

Features

• Replaceable dust nozzle to quickly change to new nozzle
• Built-in motor increases suction and high tool performance
• 2-second power off delay ensures dust extraction to continue after drill is switched off
• Drill up to 5/8 in. diameter, 4 in. useable length, 6 in. overall length bits
• Easily adjustable depth guage for accurate anchor drilling
• Replaces D25303DH
• Table 1-compliant dust management solution for 1 in. SDS Plus rotary hammers
• Clear, durable dust box ensures users can see when dust box needs to be emptied
• Fits into tight spaces on scissor lifts and between overhead pipes and duct work

Specifications

• Battery Included: No
• Battery Required: No
• Battery Test Summary: DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
• Warranty: MWC
• Country of Origin: CN
• Individual Vs. Set (Syndigo): INDIVIDUAL
• Width: 10.700 in
• Length: 14.300 in
• Claims Needed: No
• Weight: 4.709 lbs
• California Prop 65 Warning Label: http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf
• Prop 65 Generic Warning: Yes
• Power Source: NON-ENERGY USING
• Height: 4.800 in
• Housing Material: Plastic