The DWE4597N Angle Hand Grinder has a high power 4.9 HP motor with overload protection and 8,500 rpm for optimal material removal with 7-inch grinding wheels. Dust Ejection System prevents harmful dirst from entering the motor of the grinder tool.
Features
Dust Ejection Systemincreases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor
Lightweight design (12.3 lbs) lessens user fatigue
Power-Offadvanced electronic overload protection shuts the tool off before it reaches overload or burn-up
Anti-vibe side handle is a Perform and Protectfeature that reduces the users exposure to vibration
Low-profile gearcase allows for work in tight areas
Anti-Rotation E-CLUTCHSystem activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor.
Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage
Power-Loss Resetprevents accidental re-starts following a power disruption when the tool is left in the "on" position
Anti-vibe trigger handle reduces user fatigue caused by vibration
High power 4.9 HP (maximum motor HP) 8,500 rpm motor provides overload protection giving higher operating speeds under load
The DWE4597N Angle Hand Grinder has a high power 4.9 HP motor with overload protection and 8,500 rpm for optimal material removal with 7-inch grinding wheels. Dust Ejection System prevents harmful dirst from entering the motor of the grinder tool.
Features
Dust Ejection Systemincreases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor
Lightweight design (12.3 lbs) lessens user fatigue
Power-Offadvanced electronic overload protection shuts the tool off before it reaches overload or burn-up
Anti-vibe side handle is a Perform and Protectfeature that reduces the users exposure to vibration
Low-profile gearcase allows for work in tight areas
Anti-Rotation E-CLUTCHSystem activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor.
Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage
Power-Loss Resetprevents accidental re-starts following a power disruption when the tool is left in the "on" position
Anti-vibe trigger handle reduces user fatigue caused by vibration
High power 4.9 HP (maximum motor HP) 8,500 rpm motor provides overload protection giving higher operating speeds under load
Technical Detail
Specifications
Battery Test Summary: DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Overload Protection: Yes
Spindle Lock: Yes
Claims Needed: No
Electronic Speed Control: No
Cord Length: 6 Ft
Variable Speed: No
Warranty: 3LW1YS90D
Length: 24.400 in
Amperage: 15
Certifications Or Listings: CSA Listed
Wheel Diameter: 7 in In.
Cordless Vs. Corded: Corded
Individual Vs. Set (Syndigo): INDIVIDUAL
Power Source: Electric
Arbor Size: 5/8 - 11
Handle Type: 3-Postition Handle
Width: 5.100 in
Battery Included: No
Replaceable Brushes: No
Country of Origin: CN
Prop 65 Generic Warning: Yes
Maximum Speed: 8500 RPM Rpm
Weight: 15.400 lbs
Switch Type: Trigger
California Prop 65 Warning Label: http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf
