The DCK299M2 20V MAX combo kit features DEWALT cordless tools which are ideal for most drilling, hammering and fastening applications. This DEWALT 20 volt tools kit includes a DCF887 impact driver, DCD996 hammer drill, two 5.0 Ah battery packs and a charger. Both the impact driver and hammer drill have a compact and lightweight design to fit into tight areas, as well as an ergonomic handle for comfort and control.
Features
DCF887 20V MAX 1/4" impact driver provides 1,825 in-lbs of max torque at fast 0-3,250 RPM speed and 0-3,600 impacts per minute
DCD996 20V MAX hammerdrill includes 3-Mode LED providing lighting in dark or confined spaces up to 20X brighter than previous model
DCD996 20V MAX 1/2" hammerdrill 0-38,250 BPM for fast drilling in masonry materials
DCD996 20V MAX 1/2" hammerdrill has a compact size (8.4" front-to-back length) and lightweight (4.7 lbs) design to fit tight areas
DCF887 20V MAX 1/4" impact driver has a compact size (5.3" front-to-back length) and lightweight (3.4 lbs) design
DCD996 20V MAX 1/2" hammerdrill 3-speed, high performance (0-2,250 rpm), all-metal transmission optimizes tool-to-task for fast application speeds and improved run-time
The DCK299M2 20V MAX combo kit features DEWALT cordless tools which are ideal for most drilling, hammering and fastening applications. This DEWALT 20 volt tools kit includes a DCF887 impact driver, DCD996 hammer drill, two 5.0 Ah battery packs and a charger. Both the impact driver and hammer drill have a compact and lightweight design to fit into tight areas, as well as an ergonomic handle for comfort and control.
Features
DCF887 20V MAX 1/4" impact driver provides 1,825 in-lbs of max torque at fast 0-3,250 RPM speed and 0-3,600 impacts per minute
DCD996 20V MAX hammerdrill includes 3-Mode LED providing lighting in dark or confined spaces up to 20X brighter than previous model
DCD996 20V MAX 1/2" hammerdrill 0-38,250 BPM for fast drilling in masonry materials
DCD996 20V MAX 1/2" hammerdrill has a compact size (8.4" front-to-back length) and lightweight (4.7 lbs) design to fit tight areas
DCF887 20V MAX 1/4" impact driver has a compact size (5.3" front-to-back length) and lightweight (3.4 lbs) design
DCD996 20V MAX 1/2" hammerdrill 3-speed, high performance (0-2,250 rpm), all-metal transmission optimizes tool-to-task for fast application speeds and improved run-time
Technical Detail
Specifications
Battery Qty: 2
Battery Type: 20V MAX* Lithium Ion
Amperage: 5
Number Of Additional Tools Included: 2
Case Type: Hard
Cordless Vs. Corded: Cordless
Battery Required: Yes
Rechargeable: Yes
Battery Amp Hours: 5 Ah Ah
Hazmat Code: A1
Engine: Brushless
Certifications Or Listings: UL Listed
Keyless/Keyed: Keyless
California Prop 65 Warning Label: http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf
Weight: 14.150 lbs
Net Lit-Ion Y/N: Yes
Number Of Batteries Required: 1
Motor Type: Brushless
Individual Vs. Set (Syndigo): SET
Width: 14.500 in
Battery Included: Yes
Watt Hours: 100
Battery Weight: 1.4
Country of Origin: US
Height: 5.250 in
Prop 65 Generic Warning: Yes
Chuck Type: Keyless
File/Certification Number (Lowes Required): TBD/Transition
Voltage: 20 V V
Charger Type: Wall Mountable Charging Base
Warranty: 3LW1YS90D
Power Source: Battery
Charger Included: Yes
Battery Test Summary: DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Claims Needed: Yes
Length: 14.900 in
Kit: Yes
Disclaimer: * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.