The wishlist name can't be left blank
×

:

Not a valid Time
This is a required field.
DCD 3

DCD 3" Diameter 50,000 lb. Line Swivel 1/EA

DCD 7/8

DCD 7/8" Diameter 2,250 lb. Locking Line Swivel 1/EA

DCD 3-3/4" Diameter 62,500 lb. Line Swivel 1/EA

$2,102.96
Availability: Pending Availability



SKU
DCD 00505-050
Sold Per 1 Each DCD 3-3/4" Diameter 62,500 lb. Line Swivel Product Information:

DCD Line Swivels are typically constructed with a thrust bearing for tensile load and a radial bearing for bending load. They combine a high safe working load with a compact design. All sizes incorporate an oil seal and are manufactured from high strength stainless steel

DCD Locking Line Swivels are typically constructed with a bronze thrust bearing for tensile load and a radial bearing for bending load. The bronze bearing will rotate up to a portion of the safe working load before locking. Once past this point, then rotation will only occur when pulling tension is relieved

Sizes 00505-020 and larger are supplied with a grease point for lubrication. This is particularly useful in overhead applications where high speed rotation is possible

All sizes of both types are pull tested to verify the 3:1 safety factor and all swiveling sizes are fully capable of rotation at full working load. Test certificates are available upon request

Sizes 00505-025 and larger are supplied with hexagon clevis pins. Smaller sizes have slotted clevis pins

A metric 5 kN size 00506-008 with slotted clevis pins is also available. Contact DCD Design for other metric equivalents

Under no circumstances should alternate clevis pins be used

Permanent peen marking is now standard on all line swivels and material traceability for all batches produced

This swivel is made from alloy steel with a black oxide finish, all others are stainless steel Part No.: 00505-050 3:1 Safe Working Load: 62,500.00 lbs. 5:1 Safe Working Load: 37,500.00 lbs. A: 3-3/4" B: 1-1/2" C: 1-1/4" D: 15-9/16" Weight: 34.00 lbs. Replacement Clevis Pin: 00050-HEX

More Information
Alt ProductID 00505-050
Diameter 3-3/4"
Weight 34.000000
New Yes
Description Sold Per 1 Each DCD 3-3/4" Diameter 62,500 lb. Line Swivel Product Information:

DCD Line Swivels are typically constructed with a thrust bearing for tensile load and a radial bearing for bending load. They combine a high safe working load with a compact design. All sizes incorporate an oil seal and are manufactured from high strength stainless steel

DCD Locking Line Swivels are typically constructed with a bronze thrust bearing for tensile load and a radial bearing for bending load. The bronze bearing will rotate up to a portion of the safe working load before locking. Once past this point, then rotation will only occur when pulling tension is relieved

Sizes 00505-020 and larger are supplied with a grease point for lubrication. This is particularly useful in overhead applications where high speed rotation is possible

All sizes of both types are pull tested to verify the 3:1 safety factor and all swiveling sizes are fully capable of rotation at full working load. Test certificates are available upon request

Sizes 00505-025 and larger are supplied with hexagon clevis pins. Smaller sizes have slotted clevis pins

A metric 5 kN size 00506-008 with slotted clevis pins is also available. Contact DCD Design for other metric equivalents

Under no circumstances should alternate clevis pins be used

Permanent peen marking is now standard on all line swivels and material traceability for all batches produced

This swivel is made from alloy steel with a black oxide finish, all others are stainless steel Part No.: 00505-050 3:1 Safe Working Load: 62,500.00 lbs. 5:1 Safe Working Load: 37,500.00 lbs. A: 3-3/4" B: 1-1/2" C: 1-1/4" D: 15-9/16" Weight: 34.00 lbs. Replacement Clevis Pin: 00050-HEX

Working Load Limit 62,500 lb