Sold Per 1 Each
DCD 2" Vibratory Plow Grip
Product Information:
This product is specifically designed for installation of PVC or PE duct by vibratory plow and is particularly suited to agricultural applications because of its quick installation and removal
DCD Plow-Grips are comprised of a stainless steel body and a clevis head with 8 links of hardened steel chain attached and hardened stainless steel expanding jaws with teeth that grip the inside of the ducting
Since there are various outside and inside diameters for ducting, the DCD plow grip now has a single sleeve with a different bore size at each end. Should your ducting not fit at one end, reverse the sleeve and check the other end. The two sleeve sizes will cover 80 lb. and 100 lb. PE duct and Sched. 40 up to SDR 26 PVC duct as well as CSA B137.1 PE duct
To assemble the Plow-Grip to the ducting, the head is pushed against a spring which contracts the hardened steel jaws. The Plow-Grip can then be sleeved over the ducting. When the head is released, the jaws expand inside the duct and bite into the duct wall. As the pulling load is applied, it increases the bite of the jaws. When the pull is complete, pushing the head down will again contract the jaws allowing the Plow-Grip to be removed from the ducting
The main appeal of this product is the extreme ease of attaching the product to the ducting. This can easily be done in just a few seconds and no tools are required
Typical vibratory plow action causes a very fine dust or powder to surround the puller, it is recommended that the user periodically dismantle the product for thorough cleaning. A wrench is the only tool required for complete dismantling Part No.: 00600-200 Nominal Duct Size: 2" Min. Duct Inside Dia.: 1.95" Max. Duct Inside Dia.: 2.23" Max. Duct Outside Dia.: 2.685" Weight: 9.06 lbs.
| Alt ProductID | 00600-200 |
|---|---|
| Weight | 9.100000 |
| New | Yes |
| Description | Sold Per 1 Each
DCD 2" Vibratory Plow Grip
Product Information:
This product is specifically designed for installation of PVC or PE duct by vibratory plow and is particularly suited to agricultural applications because of its quick installation and removal DCD Plow-Grips are comprised of a stainless steel body and a clevis head with 8 links of hardened steel chain attached and hardened stainless steel expanding jaws with teeth that grip the inside of the ducting Since there are various outside and inside diameters for ducting, the DCD plow grip now has a single sleeve with a different bore size at each end. Should your ducting not fit at one end, reverse the sleeve and check the other end. The two sleeve sizes will cover 80 lb. and 100 lb. PE duct and Sched. 40 up to SDR 26 PVC duct as well as CSA B137.1 PE duct To assemble the Plow-Grip to the ducting, the head is pushed against a spring which contracts the hardened steel jaws. The Plow-Grip can then be sleeved over the ducting. When the head is released, the jaws expand inside the duct and bite into the duct wall. As the pulling load is applied, it increases the bite of the jaws. When the pull is complete, pushing the head down will again contract the jaws allowing the Plow-Grip to be removed from the ducting The main appeal of this product is the extreme ease of attaching the product to the ducting. This can easily be done in just a few seconds and no tools are required Typical vibratory plow action causes a very fine dust or powder to surround the puller, it is recommended that the user periodically dismantle the product for thorough cleaning. A wrench is the only tool required for complete dismantling Part No.: 00600-200 Nominal Duct Size: 2" Min. Duct Inside Dia.: 1.95" Max. Duct Inside Dia.: 2.23" Max. Duct Outside Dia.: 2.685" Weight: 9.06 lbs. |