Sold Per 1 Each
DCD 1-1/4" Pest Duct Puller
Product Information:
The Pest Duct Puller is specifically sized for pulling Dura-LineHDPE steel armor conduit. The duct puller pulls, seals (tested to over 60 psi), and prevents the duct from stretching or the layers separating by utilizing the outer body in combination with the expanding jaws. This design also features a full size rear eye nut for back loads
Safe working load is 3 times 40% of the duct yield strength to protect from creep failure Duct Puller Part No.: C2012-125 Nominal Duct Dia.: 1-1/4" 3:1 Safe Working Load: 3,600 lbs. Rear Eye Capacity(SWL): 1,000 lbs. Inside Duct Diameter: Decimal: Min.: 1.350" Max.: 1.600" Millimeter: Min.: 34.2 Max: 40.6 Duct Insertion Depth: 1.2" Weight: 2.20 lbs.
| Alt ProductID | C2012-125 |
|---|---|
| Weight | 2.200000 |
| New | Yes |
| Description | Sold Per 1 Each
DCD 1-1/4" Pest Duct Puller
Product Information:
The Pest Duct Puller is specifically sized for pulling Dura-LineHDPE steel armor conduit. The duct puller pulls, seals (tested to over 60 psi), and prevents the duct from stretching or the layers separating by utilizing the outer body in combination with the expanding jaws. This design also features a full size rear eye nut for back loads Safe working load is 3 times 40% of the duct yield strength to protect from creep failure Duct Puller Part No.: C2012-125 Nominal Duct Dia.: 1-1/4" 3:1 Safe Working Load: 3,600 lbs. Rear Eye Capacity(SWL): 1,000 lbs. Inside Duct Diameter: Decimal: Min.: 1.350" Max.: 1.600" Millimeter: Min.: 34.2 Max: 40.6 Duct Insertion Depth: 1.2" Weight: 2.20 lbs. |