The wishlist name can't be left blank
×

:

Not a valid Time
This is a required field.
SUPER PAC XTRA-LOW-Liquid Polyanionic Cellulosic Polymer  42LB

SUPER PAC XTRA-LOW-Liquid Polyanionic Cellulosic Polymer 42LB

CETCO ACCU-VIS-Liquid Drilling Fluid Polymer 44LB Pail  1/EA

CETCO ACCU-VIS-Liquid Drilling Fluid Polymer 44LB Pail 1/EA

CETCO SODA ASH 50LB BAG

$33.59
Availability: IN STOCK



Only 41 left
SKU
SODA ASH 50LB Single BAG

Sold by the Bag

50 LB BAG - 49 Bags per PALLET

DESCRIPTION:

SODA ASH is the common name for sodium carbonate, which separates calcium into sodium and carbonate ions in solution.

RECOMMENDED USE:

SODA ASH is used to raise the pH of make-up water for bentonite and polymer drilling fluids by precipitating soluble calcium. Using SODA ASH will increase the performance of bentonite and polymer drilling fluids.

Can also be used for pH correction of pool water

ADVANTAGES:

  • Easy to mix and use
  • Economical method to increase pH
  • Maximizes yield of drilling fluid

MIXING AND APPLICATION:

SODA ASH should be added slowly through a hopper or chemical barrel. When using a barrel, mix SODA ASH into a full barrel of freshwater and provide adequate agitation. Add SODA ASH until pH of 8.5-9.5 is obtained. Suggested ratio is 0.33 to 0.5 lb per 100 gallons (0.25 kg to 0.5 kg per 380 liters) water.

More Information
Alt ProductID SODA ASH 50LB Single BAG
Size 50 lb BAG
Weight 50.000000
Product Type Soda Ash
New Yes
Description

Sold by the Bag

50 LB BAG - 49 Bags per PALLET

DESCRIPTION:

SODA ASH is the common name for sodium carbonate, which separates calcium into sodium and carbonate ions in solution.

RECOMMENDED USE:

SODA ASH is used to raise the pH of make-up water for bentonite and polymer drilling fluids by precipitating soluble calcium. Using SODA ASH will increase the performance of bentonite and polymer drilling fluids.

Can also be used for pH correction of pool water

ADVANTAGES:

  • Easy to mix and use
  • Economical method to increase pH
  • Maximizes yield of drilling fluid

MIXING AND APPLICATION:

SODA ASH should be added slowly through a hopper or chemical barrel. When using a barrel, mix SODA ASH into a full barrel of freshwater and provide adequate agitation. Add SODA ASH until pH of 8.5-9.5 is obtained. Suggested ratio is 0.33 to 0.5 lb per 100 gallons (0.25 kg to 0.5 kg per 380 liters) water.

ASIN B07X4JJPCX