HOLE SLIME is a highly concentrated, liquid, surfactant/detergent that can either be used with bentonite fluids or can be added to other AMERICAN HDD polymer drilling products. Used with bentonite, HOLE SLIME will help prevent rod-sticking and seizing. When added to POLY MISSILE, it can function to create an extremely high-performance slurry for clay drilling. The product is highly concentrated, so very little is used compared to most other detergents.
RECOMMENDED USE
AMERICAN HDD polymer drilling products are designed for use in smaller diameter/short-length horizontal bores when use of bentonite is not desired. HOLE SLIME is packaged in eight-ounce bags, which is often more than enough for most 500-gallon tanks. One of these small bags is equal to roughly a full gallon of most other similar products. If there are adverse drilling conditions, single-dose bags of the other AMERICAN HDD polymer drilling products can be added as necessary. When added to POLY MISSILE fluids, generally only one to two bags are required.
ADVISORY
AMERICAN HDD polymer drilling products or any polymer products alone should never replace bentonite based drilling fluids for larger diameter, longer bore shots, or exceptionally challenging and higher risk projects.
CHARACTERISTICS
Bags are sized perfectly to match the dose needed for a 500-gallon mix tank – no half-emptied containers
Bio-green detergent can be used in environmentally sensitive areas and is Directive 50 compliant
Can also be used to clean equipment and wet-down dusty sites
Has tolerance to salt-water intrusion and can be used to drill in areas where road-salt contaminates the soil
Non-foaming formula, even with high dosages
Takes up a lot less space on a jobsite or on a shelf
Unique chemistry both acts to inhibit clay as well as functioning as one of the best wetting agents available
Very concentrated surfactant produces terrific wetting of clays and soils with very low dosage
PACKAGING
~8 ounce bag, 12 bags per case, 84 cases per pallet.
HOLE SLIME is a highly concentrated, liquid, surfactant/detergent that can either be used with bentonite fluids or can be added to other AMERICAN HDD polymer drilling products. Used with bentonite, HOLE SLIME will help prevent rod-sticking and seizing. When added to POLY MISSILE, it can function to create an extremely high-performance slurry for clay drilling. The product is highly concentrated, so very little is used compared to most other detergents.
RECOMMENDED USE
AMERICAN HDD polymer drilling products are designed for use in smaller diameter/short-length horizontal bores when use of bentonite is not desired. HOLE SLIME is packaged in eight-ounce bags, which is often more than enough for most 500-gallon tanks. One of these small bags is equal to roughly a full gallon of most other similar products. If there are adverse drilling conditions, single-dose bags of the other AMERICAN HDD polymer drilling products can be added as necessary. When added to POLY MISSILE fluids, generally only one to two bags are required.
ADVISORY
AMERICAN HDD polymer drilling products or any polymer products alone should never replace bentonite based drilling fluids for larger diameter, longer bore shots, or exceptionally challenging and higher risk projects.
CHARACTERISTICS
Bags are sized perfectly to match the dose needed for a 500-gallon mix tank – no half-emptied containers
Bio-green detergent can be used in environmentally sensitive areas and is Directive 50 compliant
Can also be used to clean equipment and wet-down dusty sites
Has tolerance to salt-water intrusion and can be used to drill in areas where road-salt contaminates the soil
Non-foaming formula, even with high dosages
Takes up a lot less space on a jobsite or on a shelf
Unique chemistry both acts to inhibit clay as well as functioning as one of the best wetting agents available
Very concentrated surfactant produces terrific wetting of clays and soils with very low dosage
PACKAGING
~8 ounce bag, 12 bags per case, 84 cases per pallet.