The wishlist name can't be left blank
×

:

Not a valid Time
This is a required field.
Proto® 3/4

Proto® 3/4" Drive Retaining Ring 1-7/16" GRV 10/BX

Proto® 3/4

Proto® 3/4" Drive Retaining Ring 1-3/4" GRV 10/BX

PROTO Rnt Rng Cg 3/4Dr 1-5/8 Grv

$7.73
Availability: Pending Availability



SKU
Proto JRR07526

Retaining rings are used to help secure sockets onto drive tools. They are not intended to bear any load. The rotational forces are between the drive tool and the socket. Designed with a resin crush gauge to help identify when to replace worn sockets. The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced. Drive tool and socket should line up when in use and should not pinch the crush gauge. Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced. One piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking.

Features

  • They are not intended to bear any load.
  • The rotational forces are between the drive tool and the socket.
  • Retaining rings are used to help secure sockets onto drive tools.
  • Designed with a resin crush gauge to help identify when to replace worn sockets.
More Information
Alt ProductID JRR07526
UPC 662679978020
Weight 0.010000
Product Type Drills & Drivers
New Yes
Description

Retaining rings are used to help secure sockets onto drive tools. They are not intended to bear any load. The rotational forces are between the drive tool and the socket. Designed with a resin crush gauge to help identify when to replace worn sockets. The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced. Drive tool and socket should line up when in use and should not pinch the crush gauge. Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced. One piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking.

Features

  • They are not intended to bear any load.
  • The rotational forces are between the drive tool and the socket.
  • Retaining rings are used to help secure sockets onto drive tools.
  • Designed with a resin crush gauge to help identify when to replace worn sockets.
Technical Detail

Specifications

  • Weight: 0.010 lbs
  • Length: 2.000 in
  • Width: 2.000 in
  • Height: 0.200 in
  • Country of Origin: US
SAE/Metric SAE
Drive Size 3/4"