Stainless Steel Lashing Wire is used in a lashing machine to lash a single aerial cable or a combination of cables to a supporting messenger strand
A specially controlled annealing process yields a uniform, fine grain structure throughout wire length and cross section for best results
Available in a 430, 302, and 316 stainless steel alloy
Modified 18-10 analysis containing approximately 2.5% molybdenum
More resistant to the corrosive action of most chemicals, including chlorides and sulfides, than any other wire
Particularly resistant to pitting and pin hole corrosion of the kind commonly caused by salt spray
Its use provides the best insurance against failure under the most severe atmospheric conditions
All lashing wire is wound in a straight hub configuration to fit all the standard GMP lashes Alloy: 316 Diameter: .065" Length of Coil: 450' Weight Per Coil: 5.3 lbs. Total: 31.8 lbs.
Alt ProductID | 71541 |
---|---|
Weight | 32.000000 |
Product Type | Lashing WIre |
New | Yes |
Description | Sold Per Coil-6 Coils Per Each
GMP .065"x450' Type 316 Stainless Steel Wire
Product Information:
Stainless Steel Lashing Wire is used in a lashing machine to lash a single aerial cable or a combination of cables to a supporting messenger strand A specially controlled annealing process yields a uniform, fine grain structure throughout wire length and cross section for best results Available in a 430, 302, and 316 stainless steel alloy Modified 18-10 analysis containing approximately 2.5% molybdenum More resistant to the corrosive action of most chemicals, including chlorides and sulfides, than any other wire Particularly resistant to pitting and pin hole corrosion of the kind commonly caused by salt spray Its use provides the best insurance against failure under the most severe atmospheric conditions All lashing wire is wound in a straight hub configuration to fit all the standard GMP lashes Alloy: 316 Diameter: .065" Length of Coil: 450' Weight Per Coil: 5.3 lbs. Total: 31.8 lbs. |
Material | 316 SS |
SAE/Metric | SAE |