For pulling fiber optic cable, DCD has a special series of sheaves and quadrants that will allow the maximum possible bend radius for the application. All the sheaves are aluminum while the quadrant side plates are 3/16" steel, giving the best combination of light weight and strength
The F/O Quadrant has 12 rollers set on a 26" radius giving the cable a minimum 26-3/4" inside bend radius
The one piece F/O Sheave is sized to fit through a 24" manhole and both the sheave and the quadrant can be used in the DCD Manhole Brace
The hanger arms also separate easily to allow insertion of the sheave or quadrant in the middle of the pull Part No.: 32800-300 Weight: 4.60 lbs.
Alt ProductID | 32800-300 |
---|---|
Weight | 8.100000 |
New | Yes |
Product Width | 3" |
Description | Sold Per 1 Each
DCD 3" Wide x 24" Diameter Single Hanger for Fiber Optic Quadrant
Product Information:
For pulling fiber optic cable, DCD has a special series of sheaves and quadrants that will allow the maximum possible bend radius for the application. All the sheaves are aluminum while the quadrant side plates are 3/16" steel, giving the best combination of light weight and strength The F/O Quadrant has 12 rollers set on a 26" radius giving the cable a minimum 26-3/4" inside bend radius The one piece F/O Sheave is sized to fit through a 24" manhole and both the sheave and the quadrant can be used in the DCD Manhole Brace The hanger arms also separate easily to allow insertion of the sheave or quadrant in the middle of the pull Part No.: 32800-300 Weight: 4.60 lbs. |