The DCD Split Entry Bell is designed to allow continuation of a single cable pull through a manhole out one side and into another side. The split feature allows removal of the guide after installation
Split Bells are available in long wearing bronze or lower cost aluminum. Bronze bell halves are held together with wing nuts and bolts while the aluminum bells use dowel pins and one lug has a 3/4" diameter lifting hole
By adding an L to the end of the part number, you can also order an Entry Bell complete with a Lube Fitting for the DCD TUBE-LUBE326 applicator systems Aluminum Part No.: 32550-200A Nominal Duct Dia.: 2" Aluminum Weight: 2.00 lbs.
Alt ProductID | 32550-200A |
---|---|
Weight | 2.000000 |
New | Yes |
Description | Sold Per 1 Each
DCD 2" Aluminum Split Entry Bell
Product Information:
The DCD Split Entry Bell is designed to allow continuation of a single cable pull through a manhole out one side and into another side. The split feature allows removal of the guide after installation Split Bells are available in long wearing bronze or lower cost aluminum. Bronze bell halves are held together with wing nuts and bolts while the aluminum bells use dowel pins and one lug has a 3/4" diameter lifting hole By adding an L to the end of the part number, you can also order an Entry Bell complete with a Lube Fitting for the DCD TUBE-LUBE326 applicator systems Aluminum Part No.: 32550-200A Nominal Duct Dia.: 2" Aluminum Weight: 2.00 lbs. |