The wishlist name can't be left blank
×

:

Not a valid Time
This is a required field.
642-1806 NO.3 HAND GRIP 18

642-1806 NO.3 HAND GRIP 18" HANDLE

CLAMP GXL LIFTING     642-2002

CLAMP GXL LIFTING 642-2002

CLAMP, 1-TON GXL

$833.76
Availability: Pending Availability



SKU
CAMPBELL 6422001
Sold Per Each 1t WLL GXL Plate Clamp 1/16"- 3/4" Grip Range Working Load Limit (Metric Tons, 2,204.6LBS = 1 Metric Ton): 1t

Can Be Used for Both Vertical and Horizontal to Vertical Lifting Through 180

Drop Forged and Heat Treated Components, with Gripping Surfaces of Case Hardened Alloy Steel.

Exclusive Feature is a Patented Wear Indicator System. When Any of the Cam's Straight Line, Convex Teeth Are Flattened Between Unique Wear Indicator Grooves, It is Time to Change the Cam.

Note: The Pad and Cam Should Be Replaced at the Same Time

Newly Designed "Cam Engaging Locking Lever" Keeps the Cam in Contact with the Plate. the Tension Arm and Spring Mechanism Facilitate Attaching and Removing the Clamp. These Clamps Will Not Lift Plate When in the "Lever Open" Position

Clamps Are 100% Proof Tested and Certificate of Test Supplied with Each Clamp

Minimum WLL of at Least 10% of the Maximum WLL

Warning: NEVER Tamper with a Clamps Tension Arm or Spring Mechanism During a Lift *Made In The USA

More Information
Alt ProductID 6422001
UPC 020418185687
Weight 10.000000
New Yes
Description Sold Per Each 1t WLL GXL Plate Clamp 1/16"- 3/4" Grip Range Working Load Limit (Metric Tons, 2,204.6LBS = 1 Metric Ton): 1t

Can Be Used for Both Vertical and Horizontal to Vertical Lifting Through 180

Drop Forged and Heat Treated Components, with Gripping Surfaces of Case Hardened Alloy Steel.

Exclusive Feature is a Patented Wear Indicator System. When Any of the Cam's Straight Line, Convex Teeth Are Flattened Between Unique Wear Indicator Grooves, It is Time to Change the Cam.

Note: The Pad and Cam Should Be Replaced at the Same Time

Newly Designed "Cam Engaging Locking Lever" Keeps the Cam in Contact with the Plate. the Tension Arm and Spring Mechanism Facilitate Attaching and Removing the Clamp. These Clamps Will Not Lift Plate When in the "Lever Open" Position

Clamps Are 100% Proof Tested and Certificate of Test Supplied with Each Clamp

Minimum WLL of at Least 10% of the Maximum WLL

Warning: NEVER Tamper with a Clamps Tension Arm or Spring Mechanism During a Lift *Made In The USA