Sold by the Pail
50 LB Pail 32/PALLET
DESCRIPTION:
SODA ASH is the common name for sodium carbonate, which
separates calcium into sodium and carbonate ions in solution.
RECOMMENDED USE:
SODA ASH is used to raise the pH of make-up water for bentonite and polymer drilling fluids by precipitating soluble calcium. Using SODA ASH will increase the performance of bentonite and polymer drilling fluids.
ADVANTAGES:
• Easy to mix and use
• Economical method to increase pH
• Maximizes yield of drilling fluid
MIXING AND APPLICATION:
SODA ASH should be added slowly through a hopper or chemical barrel. When using a barrel, mix SODA ASH into a full barrel of freshwater and provide adequate agitation. Add SODA ASH until pH of 8.5-9.5 is obtained. Suggested ratio is 0.33 to 0.5 lb per 100 gallons (0.25 kg to 0.5 kg per 380 liters) water.
Sold by the Pail
50 LB Pail 32/PALLET
DESCRIPTION:
SODA ASH is the common name for sodium carbonate, which
separates calcium into sodium and carbonate ions in solution.
RECOMMENDED USE:
SODA ASH is used to raise the pH of make-up water for bentonite and polymer drilling fluids by precipitating soluble calcium. Using SODA ASH will increase the performance of bentonite and polymer drilling fluids.
ADVANTAGES:
• Easy to mix and use
• Economical method to increase pH
• Maximizes yield of drilling fluid
MIXING AND APPLICATION:
SODA ASH should be added slowly through a hopper or chemical barrel. When using a barrel, mix SODA ASH into a full barrel of freshwater and provide adequate agitation. Add SODA ASH until pH of 8.5-9.5 is obtained. Suggested ratio is 0.33 to 0.5 lb per 100 gallons (0.25 kg to 0.5 kg per 380 liters) water.